Member darrylchiew
RATING
- Products for the Suzuki - NEW Swift - ZC21S - M15A
- Add a link to this vehicle
- Last updated on 9th Jan 2009
and viewed 663 times.
ZC21AT
>>> before tuning
Torque = 130Nm @4000 rpm & Power = 94 hp @5700 rpm (flywheel figures) on RON95
>>> after tuning
Torque = 168Nm @4000 rpm & Power = 114 hp @5400 rpm (flywheel figures) on RON98
Performance
- RRP's Open Pod Intake
- Remus Muffler
- T.M. Works Ignite Rev
- Unichip Q tuning
- NGK Iridium Spark Plugs
- RRP's Sport Radiator
- Billion Radiator Hose
- Suzuki Sport Radiator Cap
- RRP's Mid-Temp Thermostat
Handling
- Tanabe Pro NF coilovers
- SPC Camber Bolts (setting -2.0 on front wheels)
- Cusco Front Struct Bar
- Cusco Front + Rear Anti-roll Bar
- Cusco 4point underbrace
- Cusco Rear Struct Bar (boot)
- Wilwood Forged Billet Dynalite 4 pots with 2pc Rotor (Drilled + Slot)
- Hankook RS-2 Tires
Style
- Ganador wing mirror
- OZ 16" Ultraleggera rims
- Suzuki Sports lug nuts
- Suzuki Sports Front Bumper Air Intake
- Suzuki Sport top grille
- Wire mesh bottom grille
- Debadged VVT and Suzuki emblems
- OEM Mooncrest spoiler
- Facelift rear tail lamp
- Window visor
- Rear diffuser
- Mugen Brake Reservoir sock
- Kansai Intake Manifold CF Cover
- Suzuki Sport Oil Cap
- Momo Shadow Shift Knob
7 Comments
MTi responded on Thursday, 11th September 2008
Really Nice!!! 5*!!! Could you provide some more info on the brakes?
Jeong responded on Sunday, 21st September 2008
yeah! Im thinking of upgrade mine tooo!!! They are just helpless.. Can you share us more about your brakes? Havnt seen any makers hand on zc21s... whats the spec and how much does it cost to you? and How's the performance? Cheers!!
beni responded on Friday, 26th September 2008
how much you buy unicip Q????
please tell me
please tell me
darrylchiew responded on Friday, 3rd October 2008
Hey MTi, sorry to take so long to reply (same goes to everyone who responded)...
Brakes are from Wilwood, needed to have bracket customized from a workshop in Singapore. Decent street brakes with good stopping power and depressing the brake pedals doesn't throw my head out from my shoulders so that is great as well.
The cost is definitely reasonable, it cost me about 1700 SGD (which is about 1200 USD) but comes with 2 x 2-piece Wilwood rotors (slotted and drilled), 2 x Wilwood calipers and 2 x OEM front steel brake hoses.
I would think the price has drop but that's for Singapore...
Cheers mates,
darryl
Brakes are from Wilwood, needed to have bracket customized from a workshop in Singapore. Decent street brakes with good stopping power and depressing the brake pedals doesn't throw my head out from my shoulders so that is great as well.
The cost is definitely reasonable, it cost me about 1700 SGD (which is about 1200 USD) but comes with 2 x 2-piece Wilwood rotors (slotted and drilled), 2 x Wilwood calipers and 2 x OEM front steel brake hoses.
I would think the price has drop but that's for Singapore...
Cheers mates,
darryl
darrylchiew responded on Friday, 3rd October 2008
Hi Beni, Unichip with install and tuning cost about 1300 SGD (about 900 USD)... not bad feel and with dyno chart showing the gains. TCF = 1.15 but reading some forums, probably better to tune with TCF = 1.0 assuming no loss so the figures are not compensated for transmission loss.
Map responded on Monday, 5th January 2009
Nice job! I need your brake :) did you have a link for your workshop in singapore?
darrylchiew responded on Thursday, 8th January 2009
hey Map, the Singapore distributor for Wilwood kit can be found online @ www.driven.com.sg and they will hook you up with the workshop located at AMK Autopoint 4th floor.
