LX-Mode LEXUS GS450h/350/300h/250 (10 Early Model) Lineup

Features

• LX colored & gunmetallic front spoiler For Normal Bumper Model (painted and unpainted)
  • Chrome-plated extension is attached to the tip of the left and right spoiler, expressing the sense of continuousness and unity with the shape of the spindle grill.
  • In exclusive gunmetallic painting, it expresses the presence of the plating extension and directs a fashionable two-tone color with a sense of unity with the bumper grille.
  • Fixed to the lower end of genuine bumper with screw and double-sided tape.
  • A 0 mm compliance model forward from the genuine bumper (numerical value is the central part of the vehicle)
  • FRP resin made. Body color or exclusive use for gun metallic painting.
• LX Carbon Front Bumper Garnish / LX Gunmetallic Front Bumper Garnish (painted) / LX Gunmetallic Front Bumper Garnish (Not Coated)
  • Highlight the spindle grill shape by directing the lower end of the genuine grill to carbon or gun metallic to produce a sporty feeling.
  • Fixed with double-sided tape at the bottom of genuine grille.
  • Carbon is made of wet carbon resin clear finish / gun meta is FRP resin made gunmetal paint finish.
  • There is a setting of clearance sonar fitted car / unmounted car with both carbon and gunmetal.
  • Note: There are individual differences in the sonar mounting position of the vehicle, so the hole position may be slightly off.
  • Note: License base of dealer option can not be installed at the same time.
• LX carbon front license base / LX Gunmetallic front license base
  • Expressing the sense of unity between the sporty feeling and the bumper by making the license base carbon or gun metallic.
  • Exchange with genuine license base and fix with screw.
  • Carbon is made of wet carbon resin clear finish / gun meta is FRP resin made gunmetal paint finish.
  • LX side garnish
  • Plating-like gloss gives the body side an accent and produces a high-class feeling and low center of gravity.
  • Fixed with genuine body side with double-sided tape.
  • ABS plastic plating adjustment single color clear finish finish.
• LX Chrome Door Handle Cover E-Type / LX Carbon Door Handle Cover E-Type
  • Genuine colored door handle By partially chrome plating or carbonizing the cover, directing a sense of luxury and sportiness.
  • Fixed to the original outer door handle with double-sided tape.
  • Chrome chrome plated finish made of heat-resistant ABS resin.
  • Carbon is a clear paint finish made of ABS + wet carbon resin.
  • 4 piece set (grip part only)
• LX colored trunk spoiler (painted) / LX colored trunk spoiler (unpainted)
  • Expression of genuine trunk lid to duck tail shape to express sporty feeling.
  • Fixed with double-sided tape to trunk lid with genuine paint applied.
  • FRP resin made genuine color painted finish. All color correspondence (as of February 2016)
• LX Steering Emblem Colored Base LEXUS Type-2
  • Producing the glossy feel unique to the lens by the method of putting color from the back side of the transparent lens.
  • Double-sided tape pasting type with 2 division configuration.
  • Confirmation of setting color · Please see here for purchase.
• LX Smart LED 7 point set
  • White power LED adopts brighter dressing up inside and outside.
  • Set of 7 points of courtesy lamp x4 / vanity lamp x2 / lagerge lamp x1.
  • Overseas made · car inspection correspondence.
• LX Smart Super LED fog bulb (white) (H11 / H16) / LX Smart Super LED Fog Valve (Yellow) (H11 / H16)
  • High power LED bulb kit with about 6500k for white and about 2700k for yellow. In addition to fashionability White is 4200 lumens, yellow is brightness of 2,200 lumens and it has sufficient practicality.
  • In addition to the conventional heat sink, a cooling fan is installed behind the valve to forcibly cool even the heat increasing in proportion to the power.
  • Replace the genuine valve with the LED bulb of the kit and install the coupler OK.
  • Overseas made · car inspection correspondence. Set of 2 left and right.
• LX Smart HID White Valve
  • Genuine projector type discharge head lamp Valve set to replace the burner of a car and make it brilliant white.
  • 35W Since it is a general-purpose valve of 6000k D4C standard, it can be used for other cars if it is the same standard.
  • Made overseas. 2 pieces set.
• LX Smart LED Backup Lamp (T16)
  • The bulb top part and the side surface are equipped with a power LED module for reflector irradiation.
  • Backlighting behind with intense flash, supporting nighttime back.
  • Overseas made · car inspection correspondence. 2 pieces set.
• LX Rhinestone Ring (Engine Start / Stop) A-Type
  • Engine start button Strap Swarovski components are scattered around the outer circumference to produce a high-class feeling.
  • Fix the ring with chrome plating treatment with double-sided tape.
  • Brass scraping chrome plated finish.
  • Color setting · Please click here for purchase.
• LX Rhinestone Ring (Analog Clock) C-Type
  • LED analog clock The strap swarovski component is scattered around the outer circumference to produce a high-class feeling.
  • Fix the ring with chrome plating treatment with double-sided tape.
  • Brass scraping chrome plated finish.
  • Use 82 Strass Swarovski Components Crystals.
  • Color setting · Please click here for purchase.
• LX Premium Floor Mat / LX floor mat
  • A vehicle inspection correspondence model that used a fitting design and a flame retardant standard compliant product for exclusive use of the model.
• LX Premium Mat uses a luxurious hair-length mat of about 14 mm, non-woven fabric processed slip on the lining and supports genuine hook fixation.
• LX Mat uses fabrics with about 8 mm of hair feet, rubbing against rubber back on the back to handle genuine hook fixation.
  • Three colors of black, beige, gray, sewn in front seats of LX - MODE tags to match interior colors.
  • Note:  The image is different from LX Floor Mat Black, the vehicle concerned
• LX LED turn signal valve kit
• It realizes bright and beautiful lighting by making the turn signal bulb LED.
• Reduced power consumption and reduced burden on batteries.
• Prevents the high flasher specific to LED with the included regulator.
• Set of four light bulbs and regulators (PIAA valves and regulators)