Monster Sport Twin Charge Carbon Hood Type 2 for Cappuccino

Monster Sport has created the Twin Charge Carbon Hood Type 2 after receiving many requests from customers who are looking for a bonnet to us for Gymkhana type events.  This bonnet helps with both air intake and discharge.  It is even 25% lighter than the already light standard aluminium bonnet (4.18kg. versus 5.6kg.).

■ air inlet duct

In the vicinity of the air intake portion of the air cleaner, they have provided an air inlet duct of excellent NACA duct shape to the intake efficiency. Suzuki sport made ​​air funnel cleaner COMPE By use in combination with, and leads to the air cleaner fresh outdoor air directly. (※ air funnel cleaner COMPE setting car applies EA11R only.) 
In addition, by fabricating the inner duct in the user side, it is also possible to construct the intake system using the ram pressure. 

■ Air outlet with lip
It will actively discharge the heat in the engine bay, providing a lip just before the air outlet. (By providing a lip, to increase the flow speed of the air, the air outlet unit is a negative pressure region to pull the heat in the engine room.)

■ Round trim
The outer edge of a normal resin hood is cut off with an acute angle, however, the Twin Charger Carbon Hood Type 2 has adopted a round structure that conceals the end face. 

■ high rigidity frame
A very strong and rigid carbon bonnet.

【Notes】

On the nature of the carbon fiber, and out of the warp to the body, there is a case where the pattern of the fibers is not uniform. Product has become clear gel coat finish, but does not last long as the painted surfaces. Before use, a long period of time by applying a clear coating with UV cut effect, it is possible to maintain the luster.

Made-to-Order, please allow approximately 3 months prior to shipping.