The Voltex GT Wing Type 1 & 2 has been designed for FR cars, for uses ranging from Drag Racing to Time Attack
Nengun R32 with Voltex GT Wing Type 2
The Voltex GT Wing Type 1 & 2 has been designed for FR cars, for uses ranging from Drag Racing to Time Attack. The narrower widths being more common for Drag Racing while the wider widths are general used for Time Attack type of events. The "Type" of these wings refers to the different depths available. Each "Type" then also has different width options as seen below.
These are some of the finest looking wings available. Nengun used a Type 2 on the Nengun R32 (see photo), and it had everyone asking about it wherever we went.
Type 1: 270mm
Type 2: 300mm
Type 1: 1400mm or 1500mm
Type 2: 1400mm, 1500mm, 1600mm or 1700mm
Bracket Heights Available:
165mm, 195mm, 225mm, 245mm or 275mm
To determine the total wing height for the Type 1&2 GT Wings, add approximately 100mm to the height of the bracket.
End Plate Types Available:
Both Type 1 and Type 2 are available in either Wet Carbon or Dry Carbon
Combined end plate and wing bracket to appear as wide as possible
Still useable on the street and passes vehicle inspection in Japan
Comes with two VOLTEX end plate stickers
Some vehicles require the use of a Wind Base (order separately, not included with wing). Please contact us prior to ordering and let us know what vehicle you would like to use the wing on. Contact our Products Team at firstname.lastname@example.org
Since the year 2000, Nengun Performance has supplied over 100,000 parts direct from Fukuoka, Japan to 150 countries worldwide. If you have any questions, our experienced and friendly customer service team is always happy to help, please send us an enquiry.