Passo
Toyota
Wheels
Wheel Fitment Toyota Passo KGC10 · 2004 - 2010
Toyota Passo KGC10
- Bolt pattern
- 4 x 100
- Hub bore
- 54.1 mm
- Wheel nuts
- M12 x P1.5
| Factory | Standard | Aggressive | |
|---|---|---|---|
| 13" | 4.5J +35 | ||
| 14" | 5.0J +40 | 5.0-5.5J +38 to +45 | |
| 15" | 5.5-6.5J +40 to +45 | 6.5-7.0J +35 to +38 | |
| 16" | 6.0-6.5J +40 to +45 | 6.5-7.0J +35 to +38 | |
| 17" | 7.0J +38 to +42 |
The Passo came with 13x4.5 +35 wheels on 155/80R13 tyres, or 14x5 +40 on 175/65R14 on the Racy. Without modification, most owners run 14x5 to 14x5.5 +38 to +45 on 175/65R14, 15x5.5 to 15x6.5 +40 to +45 on 185/55R15, or 16x6 to 16x6.5 +40 to +45 on 195/45R16, the same size front and rear. On a lowered car with rolled fenders and some extra camber, 15x6.5 to 15x7 +35 to +38 on 195/50R15, 16x6.5 to 16x7 +35 to +38 on 195/45R16, or 17x7 +38 to +42 on 195/40R17 sit at or just past the fenders.
Wheel fitment information is based on factory sizes, wheel manufacturer recommendations and online research. Wheel fitment information is provided as a guide only and is not a guarantee of fitment. Fitment can vary based on body work, brands, suspension, tires and more. Learn More
Fitment Visualiser
Compare diameter, width, offset, spacers & tires on your vehicle in real-time.
Wheels
Displaying 1 to 8 new parts of 8
1 to 8 of 8
Vehicle Fitment
RAYS Hub Rings
Vehicle Fitment
RAYS RHCS Hubrings
Vehicle Fitment
Work Wheels Hub Rings
Vehicle Fitment
ENKEI Wheel Hub Rings
Vehicle Fitment
Yokohama Wheel Hub Collars
Vehicle Fitment
SSR Special Hub Ring
Vehicle Fitment
KYO-EI Hub Centric Ring
Vehicle Fitment
SSR Hub Rings
Genuine Toyota parts for the Passo KGC10 are now available direct from Japan.
See our Toyota OEM catalogs to request and purchase parts or contact us for details.
