Wheel Fitment Mitsubishi Challenger K97WG · 1996 - 2001

Mitsubishi Challenger K97WG

Bolt pattern
6 x 139.7
Hub bore
108.1 mm
Wheel nuts
M12 x P1.5
FactoryStandardAggressive
15" 7.0J +10 7.0-8.0J +0 to +10
16" 7.0-8.0J +0 to +10 8.0-8.5J -10 to +0
17" 7.5-8.0J +0 to +10 8.0-8.5J -10 to +0
18" 8.0J +0 to +10

Every grade of this Challenger came on 15x7 +10 wheels with 265/70R15 tyres, the same front and rear. Most owners run 16x7 to 16x8 +0 to +10 with 255/70R16, or 17x7.5 to 17x8 +0 to +10 with 255/65R17, without modification, and 18x8 +0 to +10 with 255/60R18 fits too. With the fender liners trimmed for full lock, 16x8 to 16x8.5 -10 to +0 with 265/70R16, or 17x8 to 17x8.5 -10 to +0 with 265/65R17, sit right at the edge of the flares.

Wheel fitment information is based on factory sizes, wheel manufacturer recommendations and online research. Wheel fitment information is provided as a guide only and is not a guarantee of fitment. Fitment can vary based on body work, brands, suspension, tires and more. Learn More

Fitment Visualiser

A wheel and tire drawn in a car's rear arch, past its fender line

Compare diameter, width, offset, spacers & tires on your vehicle in real-time.

Wheels

Displaying 121 to 121 new parts of 121

121 to 121 of 121

Vehicle Fitment

Page 6 of 6
1 | 3 | 4 | 5 | 6
Mitsubishi

Genuine Mitsubishi parts for the Challenger K97WG are now available direct from Japan.

See our Mitsubishi OEM catalogs to request and purchase parts or contact us for details.