Wheel Fitment Mitsubishi Challenger K97WG · 1996 - 2001

Mitsubishi Challenger K97WG

Bolt pattern
6 x 139.7
Hub bore
108.1 mm
Wheel nuts
M12 x P1.5
FactoryStandardAggressive
15" 7.0J +10 7.0-8.0J +0 to +10
16" 7.0-8.0J +0 to +10 8.0-8.5J -10 to +0
17" 7.5-8.0J +0 to +10 8.0-8.5J -10 to +0
18" 8.0J +0 to +10

Every grade of this Challenger came on 15x7 +10 wheels with 265/70R15 tyres, the same front and rear. Most owners run 16x7 to 16x8 +0 to +10 with 255/70R16, or 17x7.5 to 17x8 +0 to +10 with 255/65R17, without modification, and 18x8 +0 to +10 with 255/60R18 fits too. With the fender liners trimmed for full lock, 16x8 to 16x8.5 -10 to +0 with 265/70R16, or 17x8 to 17x8.5 -10 to +0 with 265/65R17, sit right at the edge of the flares.

Wheel fitment information is based on factory sizes, wheel manufacturer recommendations and online research. Wheel fitment information is provided as a guide only and is not a guarantee of fitment. Fitment can vary based on body work, brands, suspension, tires and more. Learn More

Fitment Visualiser

A wheel and tire drawn in a car's rear arch, past its fender line

Compare diameter, width, offset, spacers & tires on your vehicle in real-time.

Wheels

Displaying 1 to 24 new parts of 121

1 to 24 of 121

Vehicle Fitment

Vehicle Fitment

In Stock

Vehicle Fitment

Vehicle Fitment

Vehicle Fitment

In Stock

Vehicle Fitment

Vehicle Fitment

Vehicle Fitment

Vehicle Fitment

Vehicle Fitment

Vehicle Fitment

RAYS 17HEX L31 Lock & Nut 5H Set

USD $ 53.07 to 55.98

Vehicle Fitment

SSR 17HEX Lock & Nut Set

USD $ 49.98 to 66.64

Vehicle Fitment

Vehicle Fitment

In Stock

Vehicle Fitment

In Stock

Vehicle Fitment

Vehicle Fitment

Vehicle Fitment

In Stock

Vehicle Fitment

In Stock

Vehicle Fitment

Page 1 of 6
1 | 2 | 3 | 4 | 6
Mitsubishi

Genuine Mitsubishi parts for the Challenger K97WG are now available direct from Japan.

See our Mitsubishi OEM catalogs to request and purchase parts or contact us for details.