The Twin Power ignition amplifier incorporates both the CDI and transistor method ignition to provide optimum spark duration and maximum voltage output, resulting in crisper throttle response and a smoother engine powerband. The CDI method, capacity discharge ignition, provides maximum voltage by transferring all stored energy in the capacitor to the ignition coil so that the ignition current can buildup quickly, thus making the Twin Power very effective in the higher revs where a normal spark would tend to diminish. This strong rapid spark prevents the high rpm ignition miss that reduces peak power. The transistorized method generates high voltage by using transistors to cut off current to the coil, thus allowing for a long energy discharge. This longer spark duration allows the Twin Power to improve lower RPM throttle response and torque. The combination of the CDI and the transistor method incorporates two distinct systems into one high performance unit, hence the designation of Twin Power. The Twin Power produces a spark output that is typically 1.5-2.5 stronger than of the stock ignition system and consumes about 35% less power input than other ignition amplifiers. Each compact and attractive Twin power unit is constructed of durable anodized aluminum and sealed to prevent corrosion from moisture. General wiring harnesses are included in each unit to aid in installation and mounting. Vehicle Specific wiring harnesses are also available for certain models
Dimensions: All Twin Power Units, except for DLI II, are 91mm (L) x 80mm (W) x 34.5mm (H) and weighs Approximately 430g (~15.2oz)
| Part | Price | Order |
|---|---|---|
| 43001-AZ001 | ||
| DISCONTINUED This part is no longer available | ||
| 4399-SN002 N-2 | ||
| Twin Power Harness | DISCONTINUED This part is no longer available | |
| 4399-SZ001 Z-1 | ||
| Twin Power Harness Z-1 (FD3S) | DISCONTINUED This part is no longer available | |
| 43001-AK004 | ||
| Twin Power Type Distributor | DISCONTINUED This part is no longer available | |
| 43001-AK001 | ||
| Twin Power Type DLI | DISCONTINUED This part is no longer available | |
| 43001-AK002 | ||
| Twin Power Type DLI II | DISCONTINUED This part is no longer available | |
| 43001-AK003 | ||
| Twin Power Type Rotary | DISCONTINUED This part is no longer available | |
| 43001-AM002 | ||
| Type DLII + Harness | DISCONTINUED This part is no longer available | |
| 43001-AN001 | ||
| Type DLII + Harness | DISCONTINUED This part is no longer available | |
| 43001-AN003 | ||
| Type DLII + Harness Set | DISCONTINUED This part is no longer available | |
| 43001-AT001 | ||
| Type DLII + Harness Set | DISCONTINUED This part is no longer available | |
| 43001-AF002 | ||
| Type DLI II + Harness | DISCONTINUED This part is no longer available | |
| 43001-AF003 | ||
| Type DLI II + Harness Set | DISCONTINUED This part is no longer available | |
HKS was founded in October 1973 by Hiroyuki Hasegawa, a former Yamaha engineer, and Goichi Kitagawa, with start-up capital from Sigma Automotive; the name comes from Hasegawa, Kitagawa and Sigma. It began in a small shed at the foot of Mount Fuji, in Fujinomiya, Shizuoka, and is still based there.
In 1974 HKS built one of the first bolt-on turbo kits, for the Nissan L20 engine in the Skyline, raising output from 115 to 160 PS. Turbocharging made its name; today it also makes exhausts, springs, shocks and coilover suspension, and it marked its 50th anniversary in 2023.
Associated JDM Parts
Cusco Adjustable Rear Upper Arms
Cusco Negative Camber Upper Arm
326 Power Dashboard Mat
326 Power Racing Gloves
About NENGUN
Since the year 2000, NENGUN has supplied over 500,000 parts direct from Fukuoka, Japan to 170 countries worldwide. If you have any questions, our experienced and friendly customer service team is always happy to help, please send us an enquiry.











