Racing
Wheels
Lightweight forged and cast wheels made for the track by RAYS, Yokohama Wheel, BBS and ENKEI, shipped direct from Japan. Less weight at each corner helps your car turn in, brake and accelerate harder, lap after lap.
Racing
Displaying 1 to 24 new parts of 141
1 to 24 of 141
Yokohama Wheel ADVAN RacingTC-4 SE
weds WedsSportTC105X Forged Wheels
Yokohama Wheel ADVAN RacingGT Premium Version
RAYS VOLK RACINGTE37 Wheel
Yokohama Wheel ADVAN RacingRG-4
Yokohama Wheel ADVAN RacingGT BEYOND Wheels
RAYS VOLK RACINGTE37 SAGA S-plus 30TH Sticker Ver. Wheels
RAYS VOLK RACING21A Wheels
Yokohama Wheel ADVAN RacingRG-D2 for Truck/SUV
Yokohama Wheel ADVAN RacingRG-D2
Yokohama Wheel ADVAN RacingOni2
weds WedsSportTC105X Wheels
RAYS VOLK RACINGTE37 Saga SL Wheels
RAYS VOLK RACINGTE37V-PRO Wheels
Yokohama Wheel ADVAN RacingGT Beyond-R
RAYS VOLK RACINGTE37 SAGA S-plus 30TH Machining Ver. Wheels
Yokohama Wheel ADVAN RacingONI2 Progressive
BBS RG-R Wheels
RAYS VOLK RACINGZE40X Wheels
RAYS VOLK RACINGTE37Ultra LARGE PCD Black Shadow Ltd.
Wheels Buying Guide
The measurements that decide fit
- Diameter and width, in inches, written as 18x9.5. A larger diameter needs a lower-profile tyre to keep the same overall size.
- Offset, which Japanese makers call inset, in millimetres: the distance from the wheel's centreline to its mounting face. A higher positive figure (+45) sits the wheel further in; a lower one (+22) brings it out towards the arch.
- PCD (pitch circle diameter): the number of studs and the diameter of the circle they sit on, so 5x114.3 is five studs on a 114.3 mm circle. 4x100, 4x114.3, 5x100 and 5x114.3 are all common on Japanese cars, and a wheel must match exactly.
- Centre bore: the hole that centres the wheel on the hub. Aftermarket wheels often have a larger bore so they suit many cars, and hub rings fill the gap.
- Thread and seat: most Japanese cars use M12 x 1.25 or M12 x 1.5 studs, and the two do not interchange. Most aftermarket wheels take nuts with a 60° tapered seat, while Honda's original wheels use ball-seat nuts, which must not be used on a tapered-seat wheel. Wheel nuts are chosen by thread, seat and length.
Choosing a size
Start from the size your car came with and from sizes known to fit it. Width and offset together decide where the rim and tyre sit, so changing one usually means changing the other. Big brake calipers need clearance behind the spokes, so a car with a brake upgrade should be checked against the wheel's caliper clearance.
Forged, cast and Japanese standards
Forged wheels, such as the Volk Racing range from RAYS, are stronger for their weight than cast wheels and cost more; RAYS' Gram Lights are its cast range. The same measurements apply to every maker's wheels, from Work to SSR.
Alloy wheels for passenger cars sold in Japan must meet JWL, the standard set by the Ministry of Land, Infrastructure, Transport and Tourism, and carry its mark; makers certify their own wheels to it. A VIA mark shows the wheel has also passed testing by the Japan Vehicle Inspection Association, a third party.
Spacers and fitting
Spacers move a wheel outwards. Thin spacers fit over the studs and reduce how much thread the nut engages, so they may need longer studs or bolts; thicker ones bolt to the hub and carry studs of their own. Tighten nuts to the car maker's torque with a torque wrench and check them again after the first drive. Rules on wheel and tyre size, and on tyres that stand out past the bodywork, differ between countries.
